* 低速强击.
* 噪音小，无损伤.
* 请不要空转打进
* 使用完后请排放出箱内的空气。
- 使轴针、套管、轴帽、油封等的打进作业合理化及标准化.
- It is especially useful when assembling engines.
|
RH20 |
 | 
RH80 |
RH100Z |
| 
Standard rivet snap |
- Single blow type: Strikes once each time the lever is
pressed.
Main unit: RH20, RH80, RH90, RH100Z and RH200
- Continuous blow type: Strikes successively when the
lever is pressed.
Main unit: RH60 ( continuous blow version of RH20)
To carry out a single blow operation, release the lever
for each strike.
*The striking power is reduced slightly from the second
strike.
- It is also possible to perform marking, riveting, chipping
and drilling jobs by speparetelly ordering a rivet snap.
|
| 型号 |
总长
(mm) |
重量
(g) |
握把尺寸
(Diameter=mm) |
空气消费量
(cm3/stroke) |
空气压力
(Mpa) |
敲击能量
(kgf/m) |
行程
(mm) |
| RH20 | 213 | 900 | 37 | 220 | 0.5-0.7 | 0.23 | 12 | | RH60 | 294 | 1400 | 45 | 180 | 0.5-0.7 | 0.23 | 12 | | RH80 | 254 | 1300 | 45 | 650 | 0.5-0.7 | 0.32 | 12 | | RH90 | 328 | 1600 | 43 | 1200 | 0.5-0.7 | 0.60 | 18 | | RH100Z | 330 | 2100 | 43 | 1500 | 0.5-0.7 | 0.90 | 18 | | RH200 | 341 | 2100 | 51 | 2500 | 0.5-0.7 | 1.30 | 18 |
|
